Sanpress pipe material:

Sanpress stainless steel pipes, Material No. 1.4401 DIN 17455 and DVGW Work sheet W541, DVGW Test Mark N012

DN 12 = 15 mm
DN 20 = 22 mm
DN 25 = 28 mm
DN 32 = 35 mm
DN 40 = 42 mm

 

 

 

Press connection elements:

'Sanpress connection elements of special gunmetal according to DVGW Work Sheet W534

DN 12 = 15 mm - DVGW Test Mark U233
DN 20 = 22 mm - DVGW Test Mark U234
DN 25 = 28 mm - DVGW Test Mark U235
DN 32 = 35 mm - DVGW Test Mark U236
DN 40 = 42 mm - DVGW Test Mark U237

DIN (German Industrial Standard) DVGW ( German Gas and Water Association)

 

In a second joined forever:

the reliable press connection. The light weight of the press-connection tool (about 10 lbs or 5 kg) matches the ease of pipe connection: since the tool is electro-hydraulic (220 v), you can use it almost anywhere; versatile since it can be converted to any pipe dimension (always the right size of clamp jaws, fitted in a couple of seconds). The pressing operating supplements your familiar laying technique - you use your experience and gain time. Time you can use for your installation work.

Sanpress is dimensionally stable with extremelylow longitudinal expansion, there are no problems in installation. It can take up to a pressure of 16 bar and a temperature of 95 deg Celsius. This simple and clean connection technique means that you can forget your soldering and welding gear and the associated fire risk. This facilitates work in occupied or furnished houses for example.